Course Code: | MAR30821 |
---|---|
Location: | QMTS Training, Brisbane Campus, Royal Queensland Yacht Squadron, 578 Royal Esplanade, Manly Qld 4179 |
Face to Face Course Duration: | In-class full-time for 3 weeks |
FACE TO FACE COURSE DATES: | Monday 03/02/25 – Wednesday 21/02/25
Monday 02/06/25 – Thursday 20/06/25 Monday 22/09/25 – Thursday 10/10/25 |
Distance Learning Course Duration: | You will have 12 months to compete your studies.
Depending on your motivation to complete your studies, this time can be reduced to as little as 3 months. |
Course Fees: | Face to Face Course = $4140* Distance Learning Course: $3700 (DOES NOT include the cost of the Shipboard Safety Skill Set – SSSS) *10% early bird discount available to students who enrol & pay up to 1 month prior to their Face to Face course starting A reduction in the course cost may apply for students who have successfully completed other credits relevant to this qualification. Funding is available for eligible students – please contact us to see if you are eligible. Payment Plans are available. |
Subsidised Funding: | CO-CONCESSIONAL FEES
Face to Face Course Non-Concession Fee: $3418.61 with Certificate III Guaranteed Funding Distance Learning Course Non-Concession Fee: $3418.61 with Certificate III Guaranteed Funding |
Additional Fees: | Final Practical Assessment (AMPA): $500.00 |
Course Completion Period: | 12 Months to complete the course. |
COURSE UNITS
Unit Code |
Unit of Competency |
BSBTWK201 | Work effectively with others |
HLTAID011 | Provide first aid |
MARB031 | Maintain marine internal combustion engines, propulsion plant and auxiliary systems |
MARB032 | Undertake basic maintenance of electrical systems |
MARC033 | Complete engine room tasks |
MARC034 | Maintain hull out of water |
MARC035 | Operate and maintain extra low and low voltage electrical systems and equipment |
MARC036 | Operate deck machinery |
MARC039 | Operate marine internal combustion engines, and propulsion and auxiliary systems |
MARC040 | Manage fuel systems |
MARC041 | Operate and monitor marine internal combustion engines, propulsion plant and auxiliary systems |
MARC042 | Operate electrical systems |
MARF027 | Apply basic survival skills in the event of vessel abandonment |
MARF028 | Follow procedures to minimise and fight fires on board a vessel |
MARF029 | Meet work health and safety requirements |
MARF030 | Survive at sea using survival craft |
MARJ006 | Follow environmental work practices |
Note: The 4 (four) units MARF027, MARF028, MARF029 and MARF030 make up the Shipboard Safety Skill Set (SSSS) course.
The Shipboard Safety Skill Set (SSSS) is a stand alone course not delivered with the remainder of the MED 2 Course. There are additional course fees of $700.00 to enroll in this course.
HLTAID011 Provide First Aid is also run seperately to the Coxswain 1 Course. There is an additional fee of $150.00 to enrol in HLTAID011 Provide First Aid.
COURSE OUTCOME
MAR30821 Certificate III in Maritime Operations (Marine Engine Driver Grade 2 Near Coastal)
Careers & Pathways:
In Queensland, the industry has identified vocational outcomes and/or areas of local demand in transport, construction,shipping and tourism sectors along the east coast.
Employment Pathway:
Operate a commercial vessel as Chief Engineer on a vessel with an inboard engine with propulsion power up to 750 kw in waters to the outer limits of the EEZ.
Higher qualification Pathways:
MAR40220 Certificate IV in Maritime Operations (Marine Engine Driver Grade 1 Near Coastal) MAR40321
MAR50120 Diploma of Marine Engineering – Engineer Class 3 Near Coastal – Engineer Watchkeeper – Electro-Technical Officer
COURSE DELIVERY
LICENSING / REGULATORY INFORMATION
This qualification is required to obtain an AMSA certificate of competency as a Marine Engine Driver Grade 2 NC as defined in Marine Order 505.
AMSA certification will require:
- Achieving MAR30821 Certificate III in Maritime Operations (Marine Engine Driver Grade 2 NC)
- Meeting the medical and eyesight requirements specified in the Standards for the medical assessment of near coastal seafarers available on the AMSA website
- An assessment by an AMSA approved assessor using the AMSA mandated practical assessment (AMPA).
- Evidence of sea service
Sea service requirement:
Qualifying sea service must be completed while performing duties as a General Purpose Hand (whether certificated or not), an Engineer, a Marine Engine Driver, an assistant to a Marine Engine Driver, an assistant to a Chief Engineer or Second Engineer.
With AMSA approved task book:
Either of the following:
(a) at least 180 days qualifying sea service on a commercial vessel with inboard diesel propulsion power ≥150 kW;
(b) at least 90 days qualifying sea service on a commercial vessel with inboard diesel propulsion power ≥150 kW while holding a workshop skills equivalent qualification.
Without AMSA approved task book:
Either of the following:
(a) at least 360 days qualifying sea service on a commercial vessel with inboard diesel propulsion power ≥150 kW;
(b) at least 180 days qualifying sea service on a commercial vessel with inboard diesel propulsion power ≥150 kW while holding a workshop skills equivalent qualification.
ENTRY REQUIREMENTS
A general command of spoken and written English, as well as the ability to write a simple report is required.
As a safety consideration, QMTS recommends all students be physically fit to carry out all the roles and responsibilities of a Marine Engine Driver Grade 2 Near Coastal as defined in Marine Order 505.
ADMISSION REQUIREMENTS
Language, Literacy, and Numeracy
It is a requirement of this course that all enrolling students undertake a language, literacy and numeracy (LLN) assessment.
Technology
As the delivery of the course relies on access to the aXcelerate Student Learner Portal, students must have access to their own computer, laptop or iPad (with Microsoft Office 365 software).
Free Wi-Fi is available in our classrooms during face to face training.
Students will require basic computer skills to complete the course without disadvantage. This includes how to access the internet, download documents, save files to a hard drive and upload files into the Student Learner Portal. On enrolment, all students receive a Student Learner Portal Learner Guide.
CERTIFICATE III GUARANTEE & ELIGIBILITY CRITERIA
The Certificate 3 Guarantee supports eligible individuals to complete their first post-school Certificate III qualification. This initiative is funded by the Queensland Government.
Students eligible for this subsidy will be required to contribute to the cost of this course through a co-contribution fee.
To be eligible for the Certificate 3 Guarantee subsidy students must:
- be 15 years or older
- be no longer at school (with the exception of school students in Years 10, 11 and 12 undertaking a VET in School (VETiS) program)
- permanently reside in Queensland
- be an Australian citizen, Australian permanent resident (including humanitarian entrants), temporary resident with the necessary visa and work permits on the pathway to permanent residency, or a New Zealand citizen
- not hold, and not be enrolled in, Certificate III or higher-level qualification (does not include qualifications completed in secondary school). Students may already hold a Certificate III qualification in the Maritime industry not funded through the Certificate 3 Guarantee
Please visit the Department of Education and Training Website and the Certificate 3 Guarantee fact sheet for further information about the eligibility criteria for the Certificate 3 Guarantee subsidy.
ENROLMENT
When enrolling into a QMTS Training course it is a requirement that all enrolment documentation is received before enrolment confirmation can occur. The required documents and information are listed below:
• Online Enrolment form
• Language, Literacy and Numeracy (LLN) Assessment
• Enrolment Induction Checklist
• Copy of Driver’s Licence (front and back) or Passport
Please also note that students will be required to provide QMTS Training with their Unique Student Identifier (USI) before enrolment can be completed.
Course workshop & practical assessment dates are number-dependent. If the minimum number of students is not reached, QMTS Training reserve the right to cancel or reschedule training dates.
COURSE PROGRAM ASSESSMENTS and PROCEDURES
All Students
Students will access all on-line assessments via their aXcelerate Student Learner Portal.
There will be two types of assessments –
- Knowledge Review Assessments: will not count towards the final assessment, but must be completed before the student can move to the next section
- Final Assessments: will assess a student’s knowledge competence
Students are allowed three (3) submissions in total (initial submission and two (2) resubmissions) for each assessment
If you are deemed to be Not Competent (NC) in a unit (after three (3) theory or three (3) practical assessment attempts, or due to disciplinary action, you will need to re-enrol in that unit and pay the unit enrolment fee to be able to re-attempt the unit assessment.
After an unsuccessful second submission, A QMTS Training Assessor may contact the student by phone to provide additional training to assist the student to complete the third submission, which may be conducted orally over the phone.
Practical Assessment
Prior to attending a practical assessment all students:
- Must successfully complete 85% of the theory assessments
- Must provide a completed task book and/or appropriate sea service
A final practical assessment may not be undertaken prior to the completion of work placement or validation of necessary sea service.
RECOGNITION PROCESS
Learners can have their competency from prior learning and work experience recognised in this qualification through the following arrangements:
Recognition of Prior Learning (RPL)
RPL is recognition of prior learning or skills obtained from previous study or work/life experience.
Learners, who through prior learning or experience believe they have gained competence in any of the skill areas, may be granted RPL upon substantiation of that claim.
QMTS Training offers RPL on enrolment and the trainer will work with the student to define the potential for a successful application process.
NB: RPL does not give the student a discount in course fees.
Credit Transfer
Students may also apply for a credit transfer upon enrolment.
Learners who have evidence in the form of AQF certification from any other RTO or authenticated VET transcripts issued by the Registrar or from an AQF authorised issuing authority for units of competency relevant to this qualification will be given credit upon enrolment.
For more information about QMTS Training Recognition
Process please refer to the Client Handbook or Phone QMTS Training on 07 3186 6930.
Shipboard Safety Skill Set
Many students undertaking this course may have already completed the four units below as part of another Maritime qualification or as part of the MARSS00008 Shipboard Safety Skill Set.
- MARF027 Apply basic survival skills in the event of vessel abandonment
- MARF028 Follow procedures to minimise and fight fires on board a vessel
- MARF029 Meet work health and safety requirements
- MARF030 Survive at sea using survival craft
As these units form part of this course, students who have completed them, will be not be required to attend on the days these units are being assessed (1-day duration).
Practical Assessments for SSSS are not scheduled on the same dates as assessments for all other Units of Competency
For more information about QMTS Training Recognition Process please refer to the Client Handbook or Phone QMTS Training on 07 3186 6930.
QUALITY and COMPLIANCE
QMTS Training is the RTO responsible for the quality and compliance of the nationally recognised training being delivered and is also the RTO that will issue any qualification or statement of attainment certificate to eligible learners.
COMPLAINTS and APPEALS
Should you at any time wish to lodge a complaint, you can do so by contacting your trainer or the Chief Executive Officer of QMTS Training on 07 3186 6930.
Please refer to the Client Handbook for further information on our Complaints and Appeals Processes.
We also provide higher qualifications for a Master up to 24m, Master up to 45m, and Master up to 45m Upgrade.
If you’re just getting started in the Maritime Industry look at completing your Shipboard Safety Skill Set Certification as the first step to Marine Safety.